When using vacuum sintering furnace, what knowledge should we know

What do we need to know when using a vacuum sintering furnace?

1. Check whether all parts and accessories in the control cabinet are complete and intact.

2. The control cabinet is installed on the corresponding foundation and fixed.

3, according to the wiring diagram, and refer to the electrical schematic, connect the external main loop and control loop, and reliable grounding, to ensure that the wiring is correct.

4, check the electrical movable part should be free of movement, no stuck phenomenon.

5, insulation resistance should not be less than 2 megohm.

6. The valves of the vacuum electric furnace must be in the closed position.

7. Put the control power switch in the off position.

8, manual pressure knob counterclockwise rotation head.

9. Put the alarm button in the open position.

10. Complete the circulating cooling water connection of the equipment according to the plan. It is recommended that the user connect a spare water (available tap water) at the total inlet and outlet of the equipment to prevent the sealing ring from burning out due to the failure of circulating water or power failure.